学術論文
Publications
2024年
Chanchayanon, T., Chaiprakaikeow, S., Jotisankasa, A. and Inazumi, S.:
Enhancing smart city energy efficiency with ground source heat pump systems and integrated energy piles,
Smart Cities, IF2023=7.0, MDPI, Vol. 7, Issue 6, pp. 3547-3586, DOI: doi.org/10.3390/smartcities7060138, 2024-11.
Nakao, K., Shiina, M. and Inazumi, S.:
Assessment of plasticity of muddy soil for earth pressure balance shield tunneling,
Tunnelling and Underground Space Technology, IF2023 =6.7, Elsevier, Vol. 153, 106044, DOI: doi.org/10.1016/j.tust.2024.106044, 2024-11.
Cong, Y. and Inazumi, S.:
Artificial neural networks and ensemble learning for enhanced liquefaction prediction in smart cities,
Smart Cities, IF2023 =7.0, MDPI, Vol. 7, Issue 5, pp. 2910-2924, DOI: doi.org/10.3390/smartcities7050113, 2024-10.
Chaiprakaikeow, S., Jotisankasa, A., Praphatsorn, W., Shrestha, A., Cheento, S., Pramusandi, S., Chaisri, P. and Inazumi, S.:
Field evaluation of moisture-suction regime and modulus of geosynthetic-reinforced soil wall with geo-composite side-drain,
Geotextiles and Geomembranes, IF2023 =4.7, Elsevier, Vol. 52, Issue 5, pp. 860-873, DOI: doi.org/10.1016/j.geotexmem.2024.05.0052024, 2024-10.
Sangprasat, K., Puttiwongrak, A. and Inazumi, S.:
Comprehensive analysis of correlations between soil electrical resistivity and geotechnical properties,
Results in Engineering, IF2023 =6.0, Elsevier, Vol. 23, 102696, DOI: doi.org/10.1016/j.rineng.2024.102696, 2024-9.
Cong, Y. and Inazumi, S.:
Ensemble learning for predicting subsurface bearing layer depths in Tokyo,
Results in Engineering, IF2023 =6.0, Elsevier, Vol. 23, 102654, DOI: doi.org/10.1016/j.rineng.2024.102654, 2024-9.
Katsuumi, A., Cong, Y. and Inazumi, S.:
AI-driven prediction and mapping of soil liquefaction risks for enhancing earthquake resilience in smart cities,
Smart Cities, IF2023 =7.0, MDPI, Vol. 7, Issue 4, pp. 1836-1856, DOI: doi.org/10.3390/smartcities7040071, 2024-7.
Inazumi, S.:
Technical challenges and innovations in existing pile extraction and associated borehole backfilling in Japan,
Case Studies in Construction Materials, IF2023 =6.5, Elsevier, Vol. 20, e03111, DOI: doi.org/10.1016/j.cscm.2024.e03111, 2024-7.
Inazumi, S., Shiina, M. and Nakao, K.:
Aeration curing for recycling construction-generated sludge and its effect of immobilizing carbon dioxide,
Case Studies in Construction Materials, IF2023 =6.5, Elsevier, Vol. 20, e02704, DOI: doi.org/10.1016/j.cscm.2023.e02704, 2024-7.
Chanchayanon, T., Chaiprakaikeow, S., Jotisankasa, A. and Inazumi, S.:
Optimization of geothermal heat pump systems for sustainable urban development in Southeast Asia,
Smart Cities, IF2023 =7.0, MDPI, Vol. 7, Issue 3, pp. 1390-1413, DOI: doi.org/10.3390/smartcities7030058, 2024-6.
Thongdetsri, T., Nontananandh, S., Khumsuprom, N., Youdee, S., Jotisankasa, A. and Inazumi, S.:
Influence of initial water content and water-to-cement-ratio on the strength and suction characteristics of cement-stabilized sediments from drainage canal,
Geotechnical Engineering Journal of the SEAGS & AGSSEA, Southeast Asian Geotechnical Society, Vol. 55, No. 2, pp. 1-9, 2024-6.
Nakao, K., Morishita, T., Miura, T. and Inazumi, S.:
Assessing sand sedimentation in drilling slurry using particle methods for ground excavation management,
Results in Engineering, IF2023 =6.0, Elsevier, Vol. 22, 102273, DOI: doi.org/10.1016/j.rineng.2024.102273, 2024-5.
Inazumi, S. and Shakya, S.:
A comprehensive review of sustainable assessment and innovation in jet grouting technologies,
Sustainability, IF2023 =3.3, MDPI, Vol. 16, Issue 10, 4113, DOI: doi.org/10.3390/su16104113, 2024-5.
Cong, Y. and Inazumi, S.:
Integration of smart city technologies with advanced predictive analytics for geotechnical investigations,
Smart Cities, IF2023 =7.0, MDPI, Vol. 7, Issue 3, pp. 1089-1108, DOI: doi.org/10.3390/smartcities7030046, 2024-5.
Intui, S., Inazumi, S. and Kosinanondh, N.:
Prediction of the Soil Surface Displacement Behavior in Bangkok, Thailand,
Natural Geo-Disasters and Resiliency, Hazarika et al (Eds.), ISBN978-981-99-9222-5, Springer, Chapter 22, pp. 255-261, DOI: doi.org/10.1007/978-981-99-9223-2_22, 2024-5.
Shakya, S. and Inazumi, S.:
Evaluation of Physical Properties and Time-Series Prediction of Long-Term Durability for Improved Ground by Ultrafine Particle Grouting Materials,
Natural Geo-Disasters and Resiliency, Hazarika et al (Eds.), ISBN978-981-99-9222-5, Springer, Chapter 27, pp. 313-321, DOI: doi.org/10.1007/978-981-99-9223-2_27, 2024-5.
Inazumi, S. and Kuwahara, S.:
Numerical simulation of backfilling behavior of boreholes,
Results in Engineering, IF2023 =6.0, Elsevier, Vol. 21, 101907, DOI: doi.org/10.1016/j.rineng.2024.101907, 2024-3.
Cong, Y., Motohashi, T., Nakao, K. and Inazumi, S.:
Machine learning predictive analysis of liquefaction resistance for sandy soils enhanced by chemical injection,
Machine Learning and Knowledge Extraction, IF2023 =4.0, MDPI, Vol. 6, Issue 1, pp. 402-419, DOI: doi.org/10.3390/make6010020, 2024-3.
Nguyen, H.S., Adachi, Y., Yamada, M., Takaue, T., Kobayashi, M., Takada, M. and Inazumi, S.:
Development of Real-Time Measuring System of Tip Position with Deep Mixing Methods,
Geo-Sustainnovation for Resilient Society: Select Proceedings of CREST 2023, Lecture Notes in Civil Engineering, Vol. 446, Springer, Chapter 4, pp. 35-45, DOI: doi.org/10.1007/978-981-99-9219-5_4, 2024-3.
Shakya, S. and Inazumi, S.:
Applicability of numerical simulation by particle method to unconfined compression tests on geomaterials,
Civil Engineering Journal, IF2023 =4.3, Salehan Institute of Higher Education, Vol. 10, No. 1, pp. 1-19, DOI: doi.org/10.28991/CEJ-2024-010-01-01, 2024-1.
本橋俊之・笹原茂生・稲積真哉・諸冨鉄之助・三浦俊彦・照井太一・稲川雄宣：
薬液注入改良体の強度発現機構と耐久性に関する実験的考察，
材料，日本材料学会，Vol. 73，No. 10，pp. 801-808，DOI: doi.org/10.2472/jsms.73.801，2024-10．
髙砂宏太朗・稲積真哉・明石博嗣：
地盤情報データベースのアンサンブル学習に基づく液状化予測の信頼性評価，
材料，日本材料学会，Vol. 73，No. 3，pp. 242-247，DOI: doi.org/10.2472/jsms.73.242，2024-3．
染谷 明・本橋俊之・稲積真哉：
地盤の不確実な浸透性を考慮した薬液注入工法の信頼性評価，
材料，日本材料学会，Vol. 73，No. 3，pp. 248-254，DOI: doi.org/10.2472/jsms.73.248，2024-3．
2023年
Shigematsu, Y., Inazumi, S., Hashimoto, R. and Yamauchi, H.:
Experimental study on properties of liquefied stabilized soil produced with different types of solidifiers and thickeners,
Case Studies in Construction Materials, IF2023 =6.5, Elsevier, Vol. 19, e02407, DOI: doi.org/10.1016/j.cscm.2023.e02407, 2023-12.
Inazumi, S., Hashimoto, R., Aizawa, E., Kuwahara, S. and Shishido, K.:
Applicability of waste silica-based additive with surfactant-type liquid thickener as borehole filler,
Journal of Material Cycles and Waste Management, IF2023 =2.7, Springer, Vol. 25, Issue 6, pp. 3776-3790, DOI: doi.org/10.1007/s10163-023-01802-9, 2023-11.
Motohashi, T., Sasahara, S. and Inazumi, S.:
Strength assessment of water-glass sand mixtures,
Gels, IF2023 =5.0, MDPI, Vol. 9, Issue 11, 850, DOI: doi.org/10.3390/gels9110850, 2023-10.
Shigematsu, Y., Inazumi, S., Chaiprakaikeow, S. and Nontananandh, S.:
Properties of high-flowability liquefied stabilized soil made of recycled construction sludge,
Recycling, IF2023 =4.6, MDPI, Vol. 8, Issue 5, 67, DOI: doi.org/10.3390/recycling8050067, 2023-8.
Shakya, S. and Inazumi, S.:
Ground modelling by MPS-CAE simulation under different influencing parameters,
Smart Geotechnics for Smart Societies, Taylor & Francis, pp. 2365-2369, DOI: doi.org/10.1201/9781003299127-365, 2023-8.
Nakao, K., Shakya, S., Nozaki, T. and Inazumi, S.:
Neutralization treatment for recycling construction-generated soils,
Applied Sciences, IF2023 =2.5, MDPI, Vol. 13, Issue 11, 6622, DOI: doi.org/10.3390/app13116622, 2023-6.
Intui, S. and Inazumi, S.:
Experimental and analytical evaluations of ground behaviors on changing in groundwater level in Bangkok,
Water, IF2023 =3.0, MDPI, Vol. 15, Issue 9, 1825, DOI: doi.org/10.3390/w15101825, 2023-5.
Shakya, S., Inazumi, S., Chao, K.C. and Wong, R.K.N.:
Innovative design method of jet grouting systems for sustainable ground improvements,
Sustainability, IF2023 =3.3, MDPI, Vol. 15, Issue 6, 5602, DOI: doi.org/10.3390/su15065602, 2023-3.
Shakya, S. and Inazumi, S.:
Soil behavior modeling by MPS-CAE simulation,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2023 =0.9, The GEOMATE International Society, Vol. 24, No. 102, pp. 18-25, DOI: doi.org/10.21660/2023.101.g12141, 2023-2.
Kowsura, S., Chaiprakaikeow, S., Jotisankasa, A., Malaikrisanachalee, S., Nontananandh, S., Nusit, K., Sawangsuriya, A. and Inazumi, S.:
Properties and performances of soil cement modified with concentrated para-rubber,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2023 =0.9, The GEOMATE International Society, Vol. 24, No. 102, pp. 42-49, DOI: doi.org/10.21660/2023.102.g12208, 2023-2.
Shakya, S., Nakao, K., Kuwahara, S. and Inazumi, S.:
Impact of the boreholes on the surrounding ground,
Water, IF2023 =3.0, MDPI, Vol. 15, Issue 1, 188, DOI: doi.org/10.3390/w15010188, 2023-1.
Inazumi, S., Shakya, S., Chio, C., Kobayashi, H. and Nontananandh:
Time-series prediction of long-term sustainability of grounds improved by chemical grouting,
Applied Sciences, IF2023 =2.5, MDPI, Vol. 13, Issue 3, 1333, DOI: doi.org/10.3390/app13031333, 2023-1.
本橋俊之・福島一馬・中尾晃揮・照井太一・諸冨鉄之助・三浦俊彦・笹原茂生・稲積真哉：
地盤の浸透性や薬液のレオロジーを考慮した薬液注入工法の性能評価手法の提案，
地盤工学ジャーナル，地盤工学会，Vol. 18，No. 4，pp. 365-379，DOI: doi.org/10.3208/jgs.18.365，2023-12．
稲積真哉：
地中既存杭の引抜孔処理におけるセメント系材料の活用，
セメント・コンクリート，セメント協会，2023年10月号，No. 920，pp. 2-7，2023-10．
2022年
Semmad, S., Jotisankasa, A., Mahannopkul, K. and Inazumi, S.:
A coupled simulation of lateral erosion, unsaturated seepage and bank instability due to prolonged high flow,
Geomechanics for Energy and the Environment, IF2022 =5.1, Elsevier, Vol. 32, 100301, DOI: doi.org/10.1016/j.gete.2021.100301, 2022-12.
Intui, S., Jindawutthiphan, J. and Inazumi, S.:
Evaluation of displacement on unsaturated soils in Bangkok plain,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =2.7, The GEOMATE International Society, Vol. 23, No. 100, pp. 126-133, DOI: doi.org/10.21660/2022.100.g12212, 2022-12.
Shakya, S., Inazumi, S. and Nontananandh, S.:
Potential of computer-aided engineering in the design of ground improvement technologies,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 19, 9675, DOI: doi.org/10.3390/app12199675, 2022-10.
Intui, S., Inazumi, S. and Soralump, S.:
Sustainability of soil/ground environment under changes in groundwater level in Bangkok plain, Thailand,
Sustainability, IF2022 =3.9, MDPI, Vol. 14, Issue 17, 10908, DOI: doi.org/10.3390/su141710908, 2022-8.
Intui, S., Inazumi, S. and Soralump, S.:
Evaluation of land subsidence during groundwater recovery,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 15, 7904, DOI: doi.org/10.3390/app12157904, 2022-8.
Nontananandh, S., Kuwahara, S. Shishido, K. and Inazumi, S.:
Influence of perforated soils on installation of new piles,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 15, 7712, DOI: doi.org/10.3390/app12157712, 2022-7.
Nakao, K., Inazumi, S., Takahashi, T. and Nontananandh, S.:
Numerical simulation of the liquefaction phenomenon by MPSM-DEM coupled CAES,
Sustainability, IF2022 =3.9, MDPI, Vol. 14, Issue 12, 7517, DOI: doi.org/10.3390/su14127517, 2022-6.
Inazumi, S., Kuwahara, S., Nontananandh, S., Jotisankasa, A. and Chaiprakaikeow, S.:
Numerical analysis for ground subsidence caused by extraction holes of removed piles,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 11, 5481, DOI: doi.org/10.3390/app12115481, 2022-5.
Nakao, K., Yamaguchi, H., Hoshino, S. and Inazumi, S.:
Applicability of weighting method as measure for existing manholes against uplifting during liquefaction,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 8, 3818, DOI: doi.org/10.3390/app12083818, 2022-4.
Intui, S., Soralump, S. and Inazumi, S.:
Behavior of bearing capacity on pile foundation during fluctuating groundwater level,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 22, No. 90, pp. 24-31, DOI: doi.org/10.21660/2022.90.gxi242, 2022-2.
Nakao, K., Inazumi, S., Takaue, T., Tanaka, S. and Shinoi, T.:
Evaluation of discharging surplus soils for relative stirred deep mixing methods by MPS-CAE analysis,
Sustainability, IF2022 =3.9, MDPI, Vol. 14, Issue 1, 58, DOI: doi.org/10.3390/su14010058, 2022-1.
⿑⽥和哉・上原知己・稲積真哉：
界面活性剤型液体増粘剤で増粘させた高水粉体比のセメントミルクの物性，
材料，日本材料学会，Vol. 71，No. 5，pp. 475-480，2022-5．
小牧貴大・中西康晴・Shakya Sudip・稲積真哉：
CAEによる中圧噴射撹拌工法の施工過程の可視化と評価，
材料，日本材料学会，Vol. 71，No. 1，pp. 67-72，2022-1．
石隈大夢・飯田哲夫・山田武史・稲積真哉：
置換・締固め・固化による柱状地盤改良工法の現場適用事例，
材料，日本材料学会，Vol. 71，No. 1，pp. 79-82，2022-1．
2021年
Inazumi, S., Hashimoto, R., Shinsaka, T., Nontananandh, S. and Chaiprakaikeow, S.:
Applicability of additives for ground improvement utilizing fine powder of waste glass,
Materials, IF2022 =3.4, MDPI, Vol. 14, Issue 18, 5169, DOI: doi.org/10.3390/ma14185169, 2021-9.
Inazumi, S., Shishido, K. and Soralump, S.:
Possibility of impervious coating for the geotechnical reuse of soil and solid waste,
Environmental Geotechnics, IF2022 =2.2, Thomas Telford, Vol. 8, Issue 5, pp. 324-333, DOI: doi.org/10.1680/jenge.17.00097, 2021-8.
Inazumi, S., Shakya, S., Komaki, T. and Nakanishi, Y.:
Numerical analysis on performance of middle-pressure jet grouting method for ground improvement,
Geosciences, IF2022 =2.7, MDPI, Vol. 11, Issue 8, 313, DOI: doi.org/10.3390/geosciences11080313, 2021-8.
Intui, S., Soralump, S., Inazumi, S. and Shishido, K.:
Application of centrifuge model tests to settlement behavior under groundwater recovery,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 21, Issue 84, pp. 34-40, DOI: doi.org/doi.org/10.21660/2021.84.j2132, 2021-8.
Inazumi, S., Adachi, Y., Nguyen, H.S. and Takaue, T.:
Ground improvement work with N-value estimation by measurement of current value,
Innovative Infrastructure Solutions, IF2022 =2.4, Springer, Vol. 6, Isssue 3, Article No.: 147, DOI: doi.org/10.1007/s41062-021-00522-z, 2021-5.
Inazumi, S., Kuwahara, S., Jotisankasa, A. and Chaiprakaikeow, S.:
Improvement mechanism of sodium carbonate on traditional composite filler,
Proceedings of the Institution of Civil Engineers – Ground Improvement, IF2022 =1.2, Thomas Telford, Vol. 174, Issue 2, pp. 132-139, DOI: doi.org/10.1680/jgrim.19.00014, 2021-5.
Nakao, K., Inazumi, S., Takaue, T., Tanaka, S. and Shinoi, T.:
Visual evaluation of relative deep mixing method type of ground-improvement method,
Results in Engineering, IF2022 =5.0, Elsevier, Vol. 8, Article 100233, DOI: doi.org/10.1016/j.rineng.2021.100233, 2021-5.
Inazumi, S., Tanaka, S., Komaki, T. and Kuwahara, S.:
Evaluation of effect of insertion of casing by rotation on existing piles,
Geotechnical Research, IF2022 =1.9, Thomas Telford, Vol. 8, Issue 1, pp. 25-37, DOI: doi.org/10.1680/jgere.20.00042, 2021-3.
Barus, R.M.N., Jotisankasa, A., Chaiprakaikeow, S., Nontananandh, S., Inazumi, S. and Sawangsuriya, A.:
Effects of relative humidity during curing on small-strain modulus of cement-treated silty sand,
Geotechnical and Geological Engineering, IF2022 =1.7, Springer, Vol. 39, pp. 2131-2146, DOI: doi.org/10.1007/s10706-020-01614-w, 2021-3.
稲積真哉・高植俊彰・田中重明・篠井隆之：
コンピュータおよび撹拌・混合模型実験による相対撹拌式深層混合処理工法の可視的性能評価，
材料，日本材料学会，Vol. 70，No. 9，pp. 706-711，2021-9．
稲積真哉・本谷洋二・関 昌則・橋本 亮・相澤英輔・水田智幸・吉本敦哉：
廃ガラス微粉末を利活用した地盤改良添加材の適用性，
地盤工学ジャーナル，地盤工学会，Vol. 16，No. 3，pp. 247-255，2021-9．
2020年
Inazumi, S., Intui, S., Jotisankasa, A., Chaiprakaikeow, S. and Kojima, K.:
Artificial intelligence system for supporting soil classification,
Results in Engineering, IF2022 =5.0, Elsevier, Vol. 8, DOI: doi.org/10.1016/j.rineng.2020.100188, 2020-12.
Inazumi, S., Kuwahara, S., Jotisankasa, A. and Chaiprakaikeow, S.:
Construction method for pulling out existing piles and influence of pulling-out holes on the surrounding ground,
Geotechnical and Geological Engineering, IF2022 =1.7, Springer, Vol. 38, Issue 1, pp. 6107-6123, DOI: doi.org/10.1007/s10706-020-01418-y, 2020-12.
Kuwahara, S., Inazumi, S., Jotisankasa, A. and Chaiprakaikeow, S.:
Influence of the condition of pullout holes on the surrounding ground,
International Journal of Geo-Engineering, IF2022 =1.6, Springer, Vol.11, Issue 1, Article No.: 10, DOI: doi.org/10.1186/s40703-020-00117-0, 2020-12.
Nguyen, H.S., Adachi, Y., Kizuki, T., Maeba, H. and Inazumi, S.:
Integration of information and communication technology (ICT) into cement deep mixing method,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 19, Issue 74, pp. 194-200, DOI: doi.org/10.21660/2020.74.9329, 2020-10.
Inazumi, S., Intui, S., Jotisankasa, A., Chaiprakaikeow, S. and Shinsaka, T.:
Applicability of mixed solidification material based on inorganic waste as soil stabilizer,
Case Studies in Construction Materials, IF2022 =6.2, Elsevier, Vol. 12, DOI: doi.org/10.1016/j.cscm.2019.e00305, 2020-6.
Inazumi, S., Jotisankasa, A., Nakao, K. and Chaiprakaikeow, S.:
Performance of mechanical agitation type of ground-improvement by CAE system using 3-D DEM,
Results in Engineering, IF2022 =5.0, Elsevier, Vol. 6, DOI: doi.org/10.1016/j.rineng.2020.1001082020, 2020-6.
Inazumi, S., Kuwahara, S., Jotisankasa, A. and Chaiprakaikeow, S.:
MPS-CAE simulation on dynamic interaction between steel casing and existing pile when pulling out existing piles,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 18, Issue 70, pp. 68-73, DOI: doi.org/10.21660/2020.70.9166, 2020-6.
稲積真哉・桑原秀一・宍戸賢一：
既存杭引抜孔の埋戻し処理におけるスパイラル撹拌工法の開発とMPS-CAE解析，
土木学会論文集C（地圏工学），土木学会，Vol. 76，No. 4，pp. 441-452，2020-12．
稲積真哉・小島一彦・橋田弘之・加藤崇浩：
土質区分判定をサポートする人工知能システムの開発，
地盤工学ジャーナル，地盤工学会，Vol. 15，No. 3，pp. 653-663，2020-9．
稲積真哉・桑原秀一・小椋功士・濱田聡一郎・中尾晃揮：
MPS-CAEによる杭先端チャッキング式既存杭引抜き工法の可視的性能評価，
地盤工学ジャーナル，地盤工学会，Vol. 15，No. 2，pp. 383-393，2020-6．
稲積真哉・桑原秀一・中尾晃揮・境田彰芳：
杭先端チャッキング式既存杭引抜き工法（PG工法）に伴う充填材注入に関する信頼性評価，
材料，日本材料学会，Vol. 69，No. 3，pp. 204-209，2020-3．
稲積真哉・重松祐司・中尾晃揮：
個別要素法による粒状体解析を用いた高流動化処理土の流動性評価，
材料，日本材料学会，Vol. 69，No. 2，pp. 165-172, 2020-2．
井出一貴・三浦俊彦・山田祐樹・高田尚哉・光本 純・稲積真哉：
土壌の分級選別処理における速効型中性系土質改良材の開発，
材料，日本材料学会，Vol. 69，No. 1，pp. 69-74，2020-1．
稲積真哉・新坂孝志・橋本 亮：
地盤改良固化材としてシリカ系混合固化材の硬化機構および硬化時間に関する実験的検討，
材料，日本材料学会，Vol. 69，No. 1，pp. 91-96，2020-1．
2019年
Inazumi, S., Adachi, Y., Kizuki, T., Tsuchiya, J. and Funahashi, M.:
Development of construction information visualization system and estimation of N-value by current value measurement on ground-improvement work,
Construction Robotics, Springer, Vol. 3, Issue 1-4, pp. 103-116, DOI: doi.org/10.1007/s41693-019-00018-4, 2019-12.
Inazumi, S., Hashida, H. and Ueyama, Y.:
Transportation behavior of radioactive substances in soils,
Environmental Geotechnics, IF2022 =2.2, Thomas Telford, Vol. 6, Issue 8, pp. 506-520, DOI: doi.org/10.1680/jenge.16.00024, 2019-12.
Inazumi, S., Intui, S., Shinsaka, T. and Hashimoto, R.:
Physical analysis of solidifying mechanism for mixed solidification material with silica admixture and blast furnace slag,
The Journal of Solid Waste Technology and Management, Widener University School of Engineering, Vol. 45, No. 4, pp. 496-501, DOI: doi.org/10.5276/JSWTM/2019.496, 2019-11.
Kuwahara, S. and Inazumi, S.:
Settlement of surrounding grounds due to existence of pile pulling-out holes,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 16, Issue 54, pp. 81-85, DOI: doi.org/10.21660/2019.54.8132, 2019-2.
Shishido, K. and Inazumi, S.:
Assessment on leakage risk of side impervious walls at coastal landfill sites,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 16, Issue 54, pp. 86-93, DOI: doi.org/10.21660/2019.54.8134, 2019-2.
Hashida, H., Inazumi, S. and Nontananandh, S.:
Possibility of neutral-based solidifying materials on preventing elution of radioactive substances from reservoirs,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 16, Issue 53, pp. 24-31, DOI: doi.org/10.21660/2019.53.8133, 2019-1.
稲積真哉・桑原秀一・橋本 功：
既存杭の引抜孔を対象とした炭酸ナトリウム混合セメントベントナイト系充填材，
材料，日本材料学会，Vol. 68，No. 7，pp. 572-577，2019-7．
中尾晃揮・稲積真哉：
相対式撹拌翼による深層混合処理工法のコンピュータシミュレーション，
建設機械，日本工業出版，Vol. 55，No. 6，pp. 29-33，2019-6．
稲積真哉：
既設構造物の解体撤去に伴う既存杭の諸問題とその引抜き工法の高度化，
建設機械，日本工業出版，Vol. 55，No. 5，pp. 60-64，2019-5．
桑原秀一・浜口伸一・島田義勝・稲積真哉：
既存杭の引抜き工における杭先端パワーチャッキング工法の施工理論と施工事例，
地盤工学ジャーナル，地盤工学会，Vol. 14，No. 1，pp. 69-76，2019-3．
稲積真哉・境田彰芳・納庄一希：
各地域の地震リスク性状に基づく構造物の地震リスクポテンシャルの評価，
材料，日本材料学会，Vol. 68，No. 3，pp. 222-227，2019-3．
稲積真哉（分担執筆）：
地盤・土構造物のリスクマネジメント～地盤崩壊・液状化のメカニズムとその解析、監視、防災対策～，
ISBN978-4-86043-582-0 C3051，エヌ・ティー・エス，2019-1．
2018年
Kubo, H., Inazumi, S. and Miura, T.:
Hydrochloric acid heat reaction method to measure cement contents in cement mixed soils,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 15, Issue 52, pp. 228-234, DOI: doi.org/10.21660/2018.52.8143, 2018-12.
Inazumi, S., Shigematsu, Y., Nakao, K. and Shishido, K.:
3-D particle flow analysis for fluidization treated soils,
American Journal of Civil and Environmental Engineering, American Association for Science and Technology, Vol. 3, No. 3, pp. 59-67, 2018-6.
Inazumi, S., Shishido, K. and Nontananandh, S.:
Remediation of heavy metals polluted soil using metal insolubilizing materials,
Journal of Environmental Protection, Scientific Research Publishing, Vol. 9, No. 7, pp. 770-789, 2018-6.
Shishido, K., Hashida, H., Inazumi, S. and Soralump, S.:
Penetration behavior of chemical grouting considering ground uncertainty,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 14, Issue 45, pp. 22-27, DOI: doi.org/10.21660/2018.45.57186, 2018-5.
Inazumi, S., Kaneko, M., Shigematsu, Y. and Shishido, K.:
Fluidity evaluation of fluidisation treated soils based on the moving particle semi-implicit method,
International Journal of Geotechnical Engineering, IF2022 =1.9, Taylor&Francis, Vol. 12, Issue 4, pp. 325-336, DOI: doi.org/10.1080/19386362.2016.1277618, 2018-4.
Inazumi, S., Shishido, K. and Urakami, K.:
Applicability of geostatistical method to ground investigation for embankments of narrow detached houses,
Geoinformatics & Geostatistics: An Overview, SciTechnol, Vol. 6, Isuue 1, DOI: doi.org/10.4172/2327-4581.1000174, 2018-3.
Hashida, H., Inazumi, S., Chuman, T. and Okamoto, I.:
On-site verification of real-time checking system for improved range by high-pressure injecting ground improvement, International Journal of GEOMATE: Geotechnique,
Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 14, Issue 41, pp. 167-172, DOI: doi.org/10.21660/2018.41.7200, 2018-1.
稲積真哉・三浦俊彦・井出一貴・高田尚哉・光本 純：
物理分析による速効型中性系土質改良材の改良機構・改良効果の検証，
土木学会論文集 G（環境），土木学会，Vol. 74，No. 4，pp. 165-175，2018-11．
稲積真哉・浜口伸一・桑原秀一：
改良型エアリフトによる既存杭抜跡地盤の埋戻し処理工法の性能評価，
建設機械施工，日本建設機械施工協会，Vol. 70，No. 9，pp. 91-101，2018-10．
稲積真哉・足立有史・木付拓磨・土屋潤一・舟橋宗毅：
ICTの活用による地盤改良工事の施工管理技術と施工機械のモータ電流値に基づくＮ値の推定，
建設機械施工，日本建設機械施工協会，Vol. 70，No. 8，pp. 90-100，2018-9．
稲積真哉・関谷美里・橋田弘之・岡本郁也・中馬忠司：
中和剤混合による高アルカリ建設発生土の植栽基盤層としての可能性，
材料，日本材料学会，Vol. 67，No. 1，pp. 59-62，2018-1．
木付拓磨・澤口 宏・今井 正・高植俊彰・土屋潤一・稲積真哉：
大口径・大深度深層混合処理工法の適用におけるリアルタイム管理システムの導入，
材料，日本材料学会，Vol. 67，No. 1，pp. 93-98，2018-1．
足立有史・木付拓磨・土屋潤一・稲積真哉：
ICT施工の導入による杭・地盤改良工事の見える化，
地盤工学会誌，地盤工学会，Vol. 66，No. 1，pp. 24-25，2018-1．
2017年
Inazumi, S., Manabe, M. and Shishido, K.:
Evaluation of containment performance from the viewpoints of diffusion and dispersion for impervious structures at coastal landfill sites,
Geotechnical and Geological Engineering, IF2022 =1.7, Springer, Vol. 35, No. 5, pp. 2191–2203, 2017-10.
Inazumi, S., Namikawa, T., Kuwahara, S. and Hamaguchi, S.:
Influence of pulling out existing piles on the surrounding ground,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 13, Issue 35, pp. 16-21, 2017-7.
Inazumi, S., Sekitani, M., Chae, K.S. and Shishido, K.:
Evaluation of maintenance strategies based on leakage risk assessment on side impervious walls at coastal landfill sites,
Materials Sciences and Applications, Scientific Research, Vol. 8, No. 6, pp. 448-475, 2017-6.
Inazumi, S., Shinsaka, T., Hashimoto, R. and Nakagishi, Y.:
Potential for silica-based solidification materials as soil improving agents,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 12, Issue 32, pp. 1-4, 2017-4.
Inazumi, S., Inazawa, T., Soralump, S., Saiki, O. and Matsumoto, H.:
Assessment of potassium silicate based surface penetration materials with low viscosity in the repair of concrete structures,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 12, Issue 29, pp. 163-170, 2017-1.
Inazumi, S., Kaneko, M., Tomoda, Y., Shigematsu, Y. and Shishido, K.:
Evaluation of flow-ability on fluidization treated soils based on flow analysis by MPS method,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 12, Issue 29, pp. 53-58, 2017-1.
2016年
Inazumi, S., Ueyama, Y. and Shishido, K.:
Numerical simulation for the movement of cesium-137 in grounds,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 11, Issues 26, pp. 2528-2533, 2016-10.
Inazumi, S., Urakami, K., Ohtsuka, S., Saiki, O. and Shishido, K.:
Prediction of spatial distribution on soil surveying values using geostastics methods,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 10, No. 2, Issues 20, pp. 1828-1833, 2016-4.
Inazumi, S., Sano, H. and Yamada, M.:
Estimation of gypsum hemihydrate content in recycled gypsums derived from gypsum boards,
Journal of Material Cycles and Waste Management, Springer, Vol. 18, Issue 1, pp. 168-176, 2016-1.
稲積真哉・眞鍋磨弥・佐伯 修・宍戸賢一：
仮設構造物の引抜き撤去工における膨潤摩擦低減材の効果に関する実験的検討，
材料，日本材料学会，Vol. 65，No. 10，pp. 733-738，2016-10．
勝見 武・稲積真哉：
講座：我が国における地盤改良技術の変遷（１．昨今の土木プロジェクトにおける発生土への対応），
材料，日本材料学会，Vol. 65，No. 8，pp. 625-629，2016-8．
稲積真哉・金子将己・重松祐司・宍戸賢一：
建設汚泥の脱水原液を母材とした超高流動化処理土の力学諸特性，
材料，日本材料学会，Vol. 65，No. 7，pp. 496-501，2016-7．
稲積真哉：
解説・廃棄物の再利用における遮水性コーティング材料・技術の開発；遮水性コーティングによる固体系廃棄物の浄化・性能改善技術，
環境浄化技術，日本工業出版，Vol. 15，No. 3，pp. 70-74，2016-5．
西村豪志・稲積真哉・大北耕三：
傾斜岩盤上の宅地盛土に対する地盤調査の事例と補強工法の提案，
材料，日本材料学会，Vol. 65，No. 1，pp. 74-79，2016-1．
日置和昭・服部健太・澤 孝平・中山義久・稲積真哉：
地盤材料試験結果がばらつく要因の分析例，
材料，日本材料学会，Vol. 65，No. 1，pp. 84-89，2016-1．
2015年
Inazumi, S., Soralump, C., Soralump, S., Ohtsuka, S. and Nakagishi, Y.:
Life cycle assessment on recycling of construction sludges in geotechnical engineering fields,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 9, No. 2, Issues 18, pp. 1553-1566, 2015-12.
佐野博昭・山田幹雄・小竹 望・稲積真哉・桑嶋啓治：
廃石膏ボード由来再生石膏を添加・混合した安定処理土の含水比推定式の提案，
地盤工学ジャーナル，地盤工学会，Vol. 10，No. 4，pp. 603-610，2015-12．
稲積真哉・眞鍋磨弥・大津宏康・佐野博昭：
鋼製遮水工の劣化を考慮したライフサイクルコスト分析に基づく維持補修戦略の検討，
地盤工学ジャーナル，地盤工学会，Vol. 10，No. 3，pp. 369-379，2015-9．
稲積真哉・眞鍋磨弥・境田彰芳：
ワイブル分布を用いた処分場遮水工の信頼性劣化予測，
材料，日本材料学会，Vol. 64，No. 3，pp. 209-214，2015-3．
稲積真哉・大津宏康・磯田隆行：
海面廃棄物処分場における遮水工構造に関する劣化予測に基づく保有水漏出挙動の評価，
土木学会論文集C（地圏工学），土木学会，Vol. 71，No. 1，pp. 20-32，2015-2．
稲積真哉・束原 純・保高徹生・田中 誠・成島誠一：
地盤環境問題の解決に向けた未来設計，
地盤工学会誌，地盤工学会，Vol. 63，No. 1，pp. 30-33，2015-1．
2014年
Inazumi, S.:
A consideration of waste treatment in metropolitan Bangkok based on long-term social environmental accounting,
International Journal of Environment and Waste Management, Inderscience Publishers, Vol. 14, No. 3, pp. 256-275, 2014-9.
Inazumi, S., Shang, H.M., Soralump, S., Nakagishi, Y., Miyatani, Y, Mori, Y. and Okuno, Y.:
Effect of the molar ratio of liquid glass grouting agents on mechanical characteristics of the solidified soils,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 7, No. 1, Issues 13, pp. 985-992, 2014-9.
Inazumi, S. and Kakuda, T.:
Performance of water cut-off and remediation promotion techniques at coastal waste landfill sites,
Journal of Material Cycles and Waste Management, Springer, Vol. 16, Issue 3, pp. 533-545, 2014-7.
Inazumi, S., Shang, H.M., Nakagishi, Y. and Kawabata, H.:
Characteristics of water-swelling friction reducing materials on the pulling-out removal of temporary works,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 6, No. 2, Issues 12, pp. 910-918, 2014-3.
稲積真哉・川端秀雄・重松祐司・宍戸賢一：
固体系廃棄物の地盤工学的有効利用における遮水性コーティングの可能性，
地盤工学ジャーナル，地盤工学会，Vol. 9，No. 3，pp. 457-466，2014-9．
佐野博昭・山田幹雄・稲積真哉・柏原 司・金子敏行・澄川圭治・中村貴敏：
ガス圧定量法を用いた製鋼スラグの炭酸カルシウム含有率試験結果に及ぼす温度と体積の影響，
建設用原材料，資源・素材学会，Vol. 22，No. 1，pp. 9-15，2014-3.
佐野博昭・山田幹雄・稲積真哉・由見真治朗・吉武 篤・渡邉洋三：
密度法を用いた廃石膏ボード由来再生石膏の半水石膏含有率の推定，
土木学会論文集C（地圏工学），土木学会，Vol. 70，No. 1，pp. 44-52，2014-1．
稲積真哉・川端秀雄・大津宏康・磯田隆行：
廃棄物処分場における遮水工としての膨潤性止水材の耐久性評価，
材料，日本材料学会，Vol. 63，No. 1，pp. 67-72，2014-1．
2013年
稲積真哉・大津宏康・奥野直紀・宍戸賢一：
津波堆積物の処理における時間を考慮した環境影響評価，
地盤工学ジャーナル，地盤工学会，Vol. 8，No. 4，pp. 533-542，2013-12．
稲積真哉・大津宏康・熊本紗也華：
廃棄物処分場における遮水シート工の劣化予測に基づく維持補修計画の提案，
土木学会論文集F4（建設マネジメント），土木学会，Vol. 69，No. 4（特集号），pp. I_9-I_18，2013-12．
稲積真哉・加藤研二・川端秀雄・中岸良裕・宍戸賢一：
地盤改良における注入材としての水膨潤性ウレタンの基礎特性，
材料，日本材料学会，Vol. 62，No. 9，pp. 593-597，2013-9．
稲積真哉：
鋼製遮水壁工法の現状・展望（特集：環境保全のための遮水工法），
基礎工，総合土木研究所，Vol. 41，No. 7，通巻480号，pp. 23-26，2013-7．
日置和昭・稲積真哉・勝見 武：
講座：地盤改良技術に関する最新動向（２．地盤汚染の封じ込め），
材料，日本材料学会，Vol. 62，No. 4，pp. 287-293，2013-4．
2012年
Inazumi, S., Ohtsu, H. and Isoda, T.:
Environmental accounting on treatment and reutilization of construction sludges in geotechnical engineering fields,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 3, No. 2, Issues 6, pp. 369-374, 2012-12.
Inazumi, S. and Ohtsu, H.:
Long-term environmental accounting on civil infrastructures in developing countries,
Journal of Environmental Science and Engineering B (formerly parts of Journal of Environmental Science and Engineering, ISSN1934-8932), ISSN2162-5263, David Publishing Company USA, Vol. 1 (Career Vol. 6), Issue 1, pp. 1-18, 2012-2.
稲積真哉・大津宏康・谷澤勇気：
社会環境会計論に基づくバンコク首都圏の廃棄物処理マネジメントの評価，
土木学会論文集F4（建設マネジメント），土木学会，Vol. 68，No. 4（特集号），pp. I_1-I_12，2012-12．
川端秀雄・若月 正・加藤研二・小林賢勝・稲積真哉：
シート状膨潤性止水材「ケミカシート」の開発，新技術・新製品トピックス，
材料，日本材料学会，Vol. 61，No. 10，p.873，2012-10．
稲積真哉・大津宏康・奥野直紀：
環境影響を考慮した災害廃棄物の広域処理の必要性に関する一考察，
廃棄物資源循環学会論文誌，廃棄物資源循環学会，Vol. 23，No. 4，pp. 199-206，2012-9．
稲積真哉・大津宏康・磯田隆行・宍戸賢一：
建設廃棄物の再資源化処理におけるプロセス遅延を考慮した環境経済性評価，
地盤工学ジャーナル，地盤工学会，Vol. 7，No. 3，pp. 479-489，2012-9．
稲積真哉・大津宏康・磯田隆行・重松祐司：
地盤材料としての建設汚泥リサイクルに関する社会環境効率性評価，
土木学会論文集C（地圏工学），土木学会，Vol. 68，No. 1，pp. 163-174，2012-3．
稲積真哉・木村 亮・葛 拓造・小林賢勝：
海面廃棄物最終処分場における集排水機能を有する鋼管矢板遮水壁の実験的検討，
廃棄物資源循環学会論文誌，廃棄物資源循環学会，Vol. 23，No. 1，pp. 42-47，2012-3．
稲積真哉・若月 正・加藤研二・小林賢勝：
膨潤性止水材の膨潤圧特性，
材料，日本材料学会，Vol. 61，No. 1，pp. 37-40，2012-1．
