Publications
2024
Nakao, K., Shiina, M. and Inazumi, S.:
Assessment of plasticity of muddy soil for earth pressure balance shield tunneling,
Tunnelling and Underground Space Technology, IF2023 =6.7, Elsevier, Vol. 153, 106044, DOI: doi.org/10.1016/j.tust.2024.106044, 2024-11.
Cong, Y. and Inazumi, S.:
Artificial neural networks and ensemble learning for enhanced liquefaction prediction in smart cities,
Smart Cities, IF2023 =7.0, MDPI, Vol. 7, Issue 5, pp. 2910-2924, DOI: doi.org/10.3390/smartcities7050113, 2024-10.
Chaiprakaikeow, S., Jotisankasa, A., Praphatsorn, W., Shrestha, A., Cheento, S., Pramusandi, S., Chaisri, P. and Inazumi, S.:
Field evaluation of moisture-suction regime and modulus of geosynthetic-reinforced soil wall with geo-composite side-drain,
Geotextiles and Geomembranes, IF2023 =4.7, Elsevier, Vol. 52, Issue 5, pp. 860-873, DOI: doi.org/10.1016/j.geotexmem.2024.05.0052024, 2024-10.
Sangprasat, K., Puttiwongrak, A. and Inazumi, S.:
Comprehensive analysis of correlations between soil electrical resistivity and geotechnical properties,
Results in Engineering, IF2023 =6.0, Elsevier, Vol. 23, 102696, DOI: doi.org/10.1016/j.rineng.2024.102696, 2024-9.
Cong, Y. and Inazumi, S.:
Ensemble learning for predicting subsurface bearing layer depths in Tokyo,
Results in Engineering, IF2023 =6.0, Elsevier, Vol. 23, 102654, DOI: doi.org/10.1016/j.rineng.2024.102654, 2024-9.
Katsuumi, A., Cong, Y. and Inazumi, S.:
AI-driven prediction and mapping of soil liquefaction risks for enhancing earthquake resilience in smart cities,
Smart Cities, IF2023 =7.0, MDPI, Vol. 7, Issue 4, pp. 1836-1856, DOI: doi.org/10.3390/smartcities7040071, 2024-7.
Inazumi, S.:
Technical challenges and innovations in existing pile extraction and associated borehole backfilling in Japan,
Case Studies in Construction Materials, IF2023 =6.5, Elsevier, Vol. 20, e03111, DOI: doi.org/10.1016/j.cscm.2024.e03111, 2024-7.
Inazumi, S., Shiina, M. and Nakao, K.:
Aeration curing for recycling construction-generated sludge and its effect of immobilizing carbon dioxide,
Case Studies in Construction Materials, IF2023 =6.5, Elsevier, Vol. 20, e02704, DOI: doi.org/10.1016/j.cscm.2023.e02704, 2024-7.
Chanchayanon, T., Chaiprakaikeow, S., Jotisankasa, A. and Inazumi, S.:
Optimization of geothermal heat pump systems for sustainable urban development in Southeast Asia,
Smart Cities , IF2023 =7.0, MDPI, Vol. 7, Issue 3, pp. 1390-1413, DOI: doi.org/10.3390/smartcities7030058, 2024-6.
Thongdetsri, T., Nontananandh, S., Khumsuprom, N., Youdee, S., Jotisankasa, A. and Inazumi, S.:
Influence of initial water content and water-to-cement-ratio on the strength and suction characteristics of cement-stabilized sediments from drainage canal,
Geotechnical Engineering Journal of the SEAGS & AGSSEA, Southeast Asian Geotechnical Society, Vol. 55, No. 2, pp. 1-9, 2024-6.
Nakao, K., Morishita, T., Miura, T. and Inazumi, S.:
Assessing sand sedimentation in drilling slurry using particle methods for ground excavation management,
Results in Engineering, IF2023 =6.0, Elsevier, Vol. 22, 102273, DOI: doi.org/10.1016/j.rineng.2024.102273, 2024-5.
Inazumi, S. and Shakya, S.:
A comprehensive review of sustainable assessment and innovation in jet grouting technologies,
Sustainability, IF2023 =3.3, MDPI, Vol. 16, Issue 10, 4113, DOI: doi.org/10.3390/su16104113, 2024-5.
Cong, Y. and Inazumi, S.:
Integration of smart city technologies with advanced predictive analytics for geotechnical investigations,
Smart Cities, IF2023 =7.0, MDPI, Vol. 7, Issue 3, pp. 1089-1108, DOI: doi.org/10.3390/smartcities7030046, 2024-5.
Intui, S., Inazumi, S. and Kosinanondh, N.:
Prediction of the Soil Surface Displacement Behavior in Bangkok, Thailand,
Natural Geo-Disasters and Resiliency, Hazarika et al (Eds.), ISBN978-981-99-9222-5, Springer, Chapter 22, pp. 255-261, DOI: doi.org/10.1007/978-981-99-9223-2_22, 2024-5.
Shakya, S. and Inazumi, S.:
Evaluation of Physical Properties and Time-Series Prediction of Long-Term Durability for Improved Ground by Ultrafine Particle Grouting Materials,
Natural Geo-Disasters and Resiliency, Hazarika et al (Eds.), ISBN978-981-99-9222-5, Springer, Chapter 27, pp. 313-321, DOI: doi.org/10.1007/978-981-99-9223-2_27, 2024-5.
Inazumi, S. and Kuwahara, S.:
Numerical simulation of backfilling behavior of boreholes,
Results in Engineering, IF2023 =6.0, Elsevier, Vol. 21, 101907, DOI: doi.org/10.1016/j.rineng.2024.101907, 2024-3.
Cong, Y., Motohashi, T., Nakao, K. and Inazumi, S.:
Machine learning predictive analysis of liquefaction resistance for sandy soils enhanced by chemical injection,
Machine Learning and Knowledge Extraction, IF2023 =4.0, MDPI, Vol. 6, Issue 1, pp. 402-419, DOI: doi.org/10.3390/make6010020, 2024-3.
Nguyen, H.S., Adachi, Y., Yamada, M., Takaue, T., Kobayashi, M., Takada, M. and Inazumi, S.:
Development of Real-Time Measuring System of Tip Position with Deep Mixing Methods,
Geo-Sustainnovation for Resilient Society: Select Proceedings of CREST 2023, Lecture Notes in Civil Engineering, Vol. 446, Springer, Chapter 4, pp. 35-45, DOI: doi.org/10.1007/978-981-99-9219-5_4, 2024-3.
Shakya, S. and Inazumi, S.:
Applicability of numerical simulation by particle method to unconfined compression tests on geomaterials,
Civil Engineering Journal, IF2023 =4.3, Salehan Institute of Higher Education, Vol. 10, No. 1, pp. 1-19, DOI: doi.org/10.28991/CEJ-2024-010-01-01, 2024-1.
2023
Shigematsu, Y., Inazumi, S., Hashimoto, R. and Yamauchi, H.:
Experimental study on properties of liquefied stabilized soil produced with different types of solidifiers and thickeners,
Case Studies in Construction Materials, IF2023 =6.5, Elsevier, Vol. 19, e02407, DOI: doi.org/10.1016/j.cscm.2023.e02407, 2023-12.
Inazumi, S., Hashimoto, R., Aizawa, E., Kuwahara, S. and Shishido, K.:
Applicability of waste silica-based additive with surfactant-type liquid thickener as borehole filler,
Journal of Material Cycles and Waste Management, IF2023 =2.7, Springer, Vol. 25, Issue 6, pp. 3776-3790, DOI: doi.org/10.1007/s10163-023-01802-9, 2023-11.
Motohashi, T., Sasahara, S. and Inazumi, S.:
Strength assessment of water-glass sand mixtures,
Gels, IF2023 =5.0, MDPI, Vol. 9, Issue 11, 850, DOI: doi.org/10.3390/gels9110850, 2023-10.
Shigematsu, Y., Inazumi, S., Chaiprakaikeow, S. and Nontananandh, S.:
Properties of high-flowability liquefied stabilized soil made of recycled construction sludge,
Recycling, IF2023 =4.6, MDPI, Vol. 8, Issue 5, 67, DOI: doi.org/10.3390/recycling8050067, 2023-8.
Shakya, S. and Inazumi, S.:
Ground modelling by MPS-CAE simulation under different influencing parameters,
Smart Geotechnics for Smart Societies, Taylor & Francis, pp. 2365-2369, DOI: doi.org/10.1201/9781003299127-365, 2023-8.
Nakao, K., Shakya, S., Nozaki, T. and Inazumi, S.:
Neutralization treatment for recycling construction-generated soils,
Applied Sciences, IF2023 =2.5, MDPI, Vol. 13, Issue 11, 6622, DOI: doi.org/10.3390/app13116622, 2023-6.
Intui, S. and Inazumi, S.:
Experimental and analytical evaluations of ground behaviors on changing in groundwater level in Bangkok,
Water, IF2023 =3.0, MDPI, Vol. 15, Issue 9, 1825, DOI: doi.org/10.3390/w15101825, 2023-5.
Shakya, S., Inazumi, S., Chao, K.C. and Wong, R.K.N.:
Innovative design method of jet grouting systems for sustainable ground improvements,
Sustainability, IF2023 =3.3, MDPI, Vol. 15, Issue 6, 5602, DOI: doi.org/10.3390/su15065602, 2023-3.
Shakya, S. and Inazumi, S.:
Soil behavior modeling by MPS-CAE simulation,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2023 =0.9, The GEOMATE International Society, Vol. 24, No. 102, pp. 18-25, DOI: doi.org/10.21660/2023.101.g12141, 2023-2.
Kowsura, S., Chaiprakaikeow, S., Jotisankasa, A., Malaikrisanachalee, S., Nontananandh, S., Nusit, K., Sawangsuriya, A. and Inazumi, S.:
Properties and performances of soil cement modified with concentrated para-rubber,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2023 =0.9, The GEOMATE International Society, Vol. 24, No. 102, pp. 42-49, DOI: doi.org/10.21660/2023.102.g12208, 2023-2.
Shakya, S., Nakao, K., Kuwahara, S. and Inazumi, S.:
Impact of the boreholes on the surrounding ground,
Water, IF2023 =3.0, MDPI, Vol. 15, Issue 1, 188, DOI: doi.org/10.3390/w15010188, 2023-1.
Inazumi, S., Shakya, S., Chio, C., Kobayashi, H. and Nontananandh:
Time-series prediction of long-term sustainability of grounds improved by chemical grouting,
Applied Sciences, IF2023 =2.5, MDPI, Vol. 13, Issue 3, 1333, DOI: doi.org/10.3390/app13031333, 2023-1.
2022
Semmad, S., Jotisankasa, A., Mahannopkul, K. and Inazumi, S.:
A coupled simulation of lateral erosion, unsaturated seepage and bank instability due to prolonged high flow,
Geomechanics for Energy and the Environment, IF2022 =5.1, Elsevier, Vol. 32, 100301, DOI: doi.org/10.1016/j.gete.2021.100301, 2022-12.
Intui, S., Jindawutthiphan, J. and Inazumi, S.:
Evaluation of displacement on unsaturated soils in Bangkok plain,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =2.7, The GEOMATE International Society, Vol. 23, No. 100, pp. 126-133, DOI: doi.org/10.21660/2022.100.g12212, 2022-12.
Shakya, S., Inazumi, S. and Nontananandh, S.:
Potential of computer-aided engineering in the design of ground improvement technologies,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 19, 9675, DOI: doi.org/10.3390/app12199675, 2022-10.
Intui, S., Inazumi, S. and Soralump, S.:
Sustainability of soil/ground environment under changes in groundwater level in Bangkok plain, Thailand,
Sustainability, IF2022 =3.9, MDPI, Vol. 14, Issue 17, 10908, DOI: doi.org/10.3390/su141710908, 2022-8.
Intui, S., Inazumi, S. and Soralump, S.:
Evaluation of land subsidence during groundwater recovery,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 15, 7904, DOI: doi.org/10.3390/app12157904, 2022-8.
Nontananandh, S., Kuwahara, S. Shishido, K. and Inazumi, S.:
Influence of perforated soils on installation of new piles,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 15, 7712, DOI: doi.org/10.3390/app12157712, 2022-7.
Nakao, K., Inazumi, S., Takahashi, T. and Nontananandh, S.:
Numerical simulation of the liquefaction phenomenon by MPSM-DEM coupled CAES,
Sustainability, IF2022 =3.9, MDPI, Vol. 14, Issue 12, 7517, DOI: doi.org/10.3390/su14127517, 2022-6.
Inazumi, S., Kuwahara, S., Nontananandh, S., Jotisankasa, A. and Chaiprakaikeow, S.:
Numerical analysis for ground subsidence caused by extraction holes of removed piles,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 11, 5481, DOI: doi.org/10.3390/app12115481, 2022-5.
Nakao, K., Yamaguchi, H., Hoshino, S. and Inazumi, S.:
Applicability of weighting method as measure for existing manholes against uplifting during liquefaction,
Applied Sciences, IF2022 =2.7, MDPI, Vol. 12, Issue 8, 3818, DOI: doi.org/10.3390/app12083818, 2022-4.
Intui, S., Soralump, S. and Inazumi, S.:
Behavior of bearing capacity on pile foundation during fluctuating groundwater level,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 22, No. 90, pp. 24-31, DOI: doi.org/10.21660/2022.90.gxi242, 2022-2.
Nakao, K., Inazumi, S., Takaue, T., Tanaka, S. and Shinoi, T.:
Evaluation of discharging surplus soils for relative stirred deep mixing methods by MPS-CAE analysis,
Sustainability, IF2022 =3.9, MDPI, Vol. 14, Issue 1, 58, DOI: doi.org/10.3390/su14010058, 2022-1.
⿑⽥和哉・上原知己・稲積真哉：
界面活性剤型液体増粘剤で増粘させた高水粉体比のセメントミルクの物性，
材料，日本材料学会，Vol. 71，No. 5，pp. 475-480，2022-5．
小牧貴大・中西康晴・Shakya Sudip・稲積真哉：
CAEによる中圧噴射撹拌工法の施工過程の可視化と評価，
材料，日本材料学会，Vol. 71，No. 1，pp. 67-72，2022-1．
石隈大夢・飯田哲夫・山田武史・稲積真哉：
置換・締固め・固化による柱状地盤改良工法の現場適用事例，
材料，日本材料学会，Vol. 71，No. 1，pp. 79-82，2022-1．
2021年
Inazumi, S., Hashimoto, R., Shinsaka, T., Nontananandh, S. and Chaiprakaikeow, S.:
Applicability of additives for ground improvement utilizing fine powder of waste glass,
Materials, IF2022 =3.4, MDPI, Vol. 14, Issue 18, 5169, DOI: doi.org/10.3390/ma14185169, 2021-9.
Inazumi, S., Shishido, K. and Soralump, S.:
Possibility of impervious coating for the geotechnical reuse of soil and solid waste,
Environmental Geotechnics, IF2022 =2.2, Thomas Telford, Vol. 8, Issue 5, pp. 324-333, DOI: doi.org/10.1680/jenge.17.00097, 2021-8.
Inazumi, S., Shakya, S., Komaki, T. and Nakanishi, Y.:
Numerical analysis on performance of middle-pressure jet grouting method for ground improvement,
Geosciences, IF2022 =2.7, MDPI, Vol. 11, Issue 8, 313, DOI: doi.org/10.3390/geosciences11080313, 2021-8.
Intui, S., Soralump, S., Inazumi, S. and Shishido, K.:
Application of centrifuge model tests to settlement behavior under groundwater recovery,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 21, Issue 84, pp. 34-40, DOI: doi.org/doi.org/10.21660/2021.84.j2132, 2021-8.
Inazumi, S., Adachi, Y., Nguyen, H.S. and Takaue, T.:
Ground improvement work with N-value estimation by measurement of current value,
Innovative Infrastructure Solutions, IF2022 =2.4, Springer, Vol. 6, Isssue 3, Article No.: 147, DOI: doi.org/10.1007/s41062-021-00522-z, 2021-5.
Inazumi, S., Kuwahara, S., Jotisankasa, A. and Chaiprakaikeow, S.:
Improvement mechanism of sodium carbonate on traditional composite filler,
Proceedings of the Institution of Civil Engineers – Ground Improvement, IF2022 =1.2, Thomas Telford, Vol. 174, Issue 2, pp. 132-139, DOI: doi.org/10.1680/jgrim.19.00014, 2021-5.
Nakao, K., Inazumi, S., Takaue, T., Tanaka, S. and Shinoi, T.:
Visual evaluation of relative deep mixing method type of ground-improvement method,
Results in Engineering, IF2022 =5.0, Elsevier, Vol. 8, Article 100233, DOI: doi.org/10.1016/j.rineng.2021.100233, 2021-5.
Inazumi, S., Tanaka, S., Komaki, T. and Kuwahara, S.:
Evaluation of effect of insertion of casing by rotation on existing piles,
Geotechnical Research, IF2022 =1.9, Thomas Telford, Vol. 8, Issue 1, pp. 25-37, DOI: doi.org/10.1680/jgere.20.00042, 2021-3.
Barus, R.M.N., Jotisankasa, A., Chaiprakaikeow, S., Nontananandh, S., Inazumi, S. and Sawangsuriya, A.:
Effects of relative humidity during curing on small-strain modulus of cement-treated silty sand,
Geotechnical and Geological Engineering, IF2022 =1.7, Springer, Vol. 39, pp. 2131-2146, DOI: doi.org/10.1007/s10706-020-01614-w, 2021-3.
2020
Inazumi, S., Intui, S., Jotisankasa, A., Chaiprakaikeow, S. and Kojima, K.:
Artificial intelligence system for supporting soil classification,
Results in Engineering, IF2022 =5.0, Elsevier, Vol. 8, DOI: doi.org/10.1016/j.rineng.2020.100188, 2020-12.
Inazumi, S., Kuwahara, S., Jotisankasa, A. and Chaiprakaikeow, S.:
Construction method for pulling out existing piles and influence of pulling-out holes on the surrounding ground,
Geotechnical and Geological Engineering, IF2022 =1.7, Springer, Vol. 38, Issue 1, pp. 6107-6123, DOI: doi.org/10.1007/s10706-020-01418-y, 2020-12.
Kuwahara, S., Inazumi, S., Jotisankasa, A. and Chaiprakaikeow, S.:
Influence of the condition of pullout holes on the surrounding ground,
International Journal of Geo-Engineering, IF2022 =1.6, Springer, Vol.11, Issue 1, Article No.: 10, DOI: doi.org/10.1186/s40703-020-00117-0, 2020-12.
Nguyen, H.S., Adachi, Y., Kizuki, T., Maeba, H. and Inazumi, S.:
Integration of information and communication technology (ICT) into cement deep mixing method,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 19, Issue 74, pp. 194-200, DOI: doi.org/10.21660/2020.74.9329, 2020-10.
Inazumi, S., Intui, S., Jotisankasa, A., Chaiprakaikeow, S. and Shinsaka, T.:
Applicability of mixed solidification material based on inorganic waste as soil stabilizer,
Case Studies in Construction Materials, IF2022 =6.2, Elsevier, Vol. 12, DOI: doi.org/10.1016/j.cscm.2019.e00305, 2020-6.
Inazumi, S., Jotisankasa, A., Nakao, K. and Chaiprakaikeow, S.:
Performance of mechanical agitation type of ground-improvement by CAE system using 3-D DEM,
Results in Engineering, IF2022 =5.0, Elsevier, Vol. 6, DOI: doi.org/10.1016/j.rineng.2020.1001082020, 2020-6.
Inazumi, S., Kuwahara, S., Jotisankasa, A. and Chaiprakaikeow, S.:
MPS-CAE simulation on dynamic interaction between steel casing and existing pile when pulling out existing piles,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 18, Issue 70, pp. 68-73, DOI: doi.org/10.21660/2020.70.9166, 2020-6.
2019
Inazumi, S., Adachi, Y., Kizuki, T., Tsuchiya, J. and Funahashi, M.:
Development of construction information visualization system and estimation of N-value by current value measurement on ground-improvement work,
Construction Robotics, Springer, Vol. 3, Issue 1-4, pp. 103-116, DOI: doi.org/10.1007/s41693-019-00018-4, 2019-12.
Inazumi, S., Hashida, H. and Ueyama, Y.:
Transportation behavior of radioactive substances in soils,
Environmental Geotechnics, IF2022 =2.2, Thomas Telford, Vol. 6, Issue 8, pp. 506-520, DOI: doi.org/10.1680/jenge.16.00024, 2019-12.
Inazumi, S., Intui, S., Shinsaka, T. and Hashimoto, R.:
Physical analysis of solidifying mechanism for mixed solidification material with silica admixture and blast furnace slag,
The Journal of Solid Waste Technology and Management, Widener University School of Engineering, Vol. 45, No. 4, pp. 496-501, DOI: doi.org/10.5276/JSWTM/2019.496, 2019-11.
Kuwahara, S. and Inazumi, S.:
Settlement of surrounding grounds due to existence of pile pulling-out holes,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 16, Issue 54, pp. 81-85, DOI: doi.org/10.21660/2019.54.8132, 2019-2.
Shishido, K. and Inazumi, S.:
Assessment on leakage risk of side impervious walls at coastal landfill sites,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 16, Issue 54, pp. 86-93, DOI: doi.org/10.21660/2019.54.8134, 2019-2.
Hashida, H., Inazumi, S. and Nontananandh, S.:
Possibility of neutral-based solidifying materials on preventing elution of radioactive substances from reservoirs,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 16, Issue 53, pp. 24-31, DOI: doi.org/10.21660/2019.53.8133, 2019-1.
2018
Kubo, H., Inazumi, S. and Miura, T.:
Hydrochloric acid heat reaction method to measure cement contents in cement mixed soils,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 15, Issue 52, pp. 228-234, DOI: doi.org/10.21660/2018.52.8143, 2018-12.
Inazumi, S., Shigematsu, Y., Nakao, K. and Shishido, K.:
3-D particle flow analysis for fluidization treated soils,
American Journal of Civil and Environmental Engineering, American Association for Science and Technology, Vol. 3, No. 3, pp. 59-67, 2018-6.
Inazumi, S., Shishido, K. and Nontananandh, S.:
Remediation of heavy metals polluted soil using metal insolubilizing materials,
Journal of Environmental Protection, Scientific Research Publishing, Vol. 9, No. 7, pp. 770-789, 2018-6.
Shishido, K., Hashida, H., Inazumi, S. and Soralump, S.:
Penetration behavior of chemical grouting considering ground uncertainty,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 14, Issue 45, pp. 22-27, DOI: doi.org/10.21660/2018.45.57186, 2018-5.
Inazumi, S., Kaneko, M., Shigematsu, Y. and Shishido, K.:
Fluidity evaluation of fluidisation treated soils based on the moving particle semi-implicit method,
International Journal of Geotechnical Engineering, IF2022 =1.9, Taylor&Francis, Vol. 12, Issue 4, pp. 325-336, DOI: doi.org/10.1080/19386362.2016.1277618, 2018-4.
Inazumi, S., Shishido, K. and Urakami, K.:
Applicability of geostatistical method to ground investigation for embankments of narrow detached houses,
Geoinformatics & Geostatistics: An Overview, SciTechnol, Vol. 6, Isuue 1, DOI: doi.org/10.4172/2327-4581.1000174, 2018-3.
Hashida, H., Inazumi, S., Chuman, T. and Okamoto, I.:
On-site verification of real-time checking system for improved range by high-pressure injecting ground improvement, International Journal of GEOMATE: Geotechnique,
Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 14, Issue 41, pp. 167-172, DOI: doi.org/10.21660/2018.41.7200, 2018-1.
2017
Inazumi, S., Manabe, M. and Shishido, K.:
Evaluation of containment performance from the viewpoints of diffusion and dispersion for impervious structures at coastal landfill sites,
Geotechnical and Geological Engineering, IF2022 =1.7, Springer, Vol. 35, No. 5, pp. 2191–2203, 2017-10.
Inazumi, S., Namikawa, T., Kuwahara, S. and Hamaguchi, S.:
Influence of pulling out existing piles on the surrounding ground,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 13, Issue 35, pp. 16-21, 2017-7.
Inazumi, S., Sekitani, M., Chae, K.S. and Shishido, K.:
Evaluation of maintenance strategies based on leakage risk assessment on side impervious walls at coastal landfill sites,
Materials Sciences and Applications, Scientific Research, Vol. 8, No. 6, pp. 448-475, 2017-6.
Inazumi, S., Shinsaka, T., Hashimoto, R. and Nakagishi, Y.:
Potential for silica-based solidification materials as soil improving agents,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 12, Issue 32, pp. 1-4, 2017-4.
Inazumi, S., Inazawa, T., Soralump, S., Saiki, O. and Matsumoto, H.:
Assessment of potassium silicate based surface penetration materials with low viscosity in the repair of concrete structures,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 12, Issue 29, pp. 163-170, 2017-1.
Inazumi, S., Kaneko, M., Tomoda, Y., Shigematsu, Y. and Shishido, K.:
Evaluation of flow-ability on fluidization treated soils based on flow analysis by MPS method,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 12, Issue 29, pp. 53-58, 2017-1.
2016
Inazumi, S., Ueyama, Y. and Shishido, K.:
Numerical simulation for the movement of cesium-137 in grounds,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 11, Issues 26, pp. 2528-2533, 2016-10.
Inazumi, S., Urakami, K., Ohtsuka, S., Saiki, O. and Shishido, K.:
Prediction of spatial distribution on soil surveying values using geostastics methods,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 10, No. 2, Issues 20, pp. 1828-1833, 2016-4.
Inazumi, S., Sano, H. and Yamada, M.:
Estimation of gypsum hemihydrate content in recycled gypsums derived from gypsum boards,
Journal of Material Cycles and Waste Management, Springer, Vol. 18, Issue 1, pp. 168-176, 2016-1.
2015
Inazumi, S., Soralump, C., Soralump, S., Ohtsuka, S. and Nakagishi, Y.:
Life cycle assessment on recycling of construction sludges in geotechnical engineering fields,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 9, No. 2, Issues 18, pp. 1553-1566, 2015-12.
2014
Inazumi, S.:
A consideration of waste treatment in metropolitan Bangkok based on long-term social environmental accounting,
International Journal of Environment and Waste Management, Inderscience Publishers, Vol. 14, No. 3, pp. 256-275, 2014-9.
Inazumi, S., Shang, H.M., Soralump, S., Nakagishi, Y., Miyatani, Y, Mori, Y. and Okuno, Y.:
Effect of the molar ratio of liquid glass grouting agents on mechanical characteristics of the solidified soils,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 7, No. 1, Issues 13, pp. 985-992, 2014-9.
Inazumi, S. and Kakuda, T.:
Performance of water cut-off and remediation promotion techniques at coastal waste landfill sites,
Journal of Material Cycles and Waste Management, Springer, Vol. 16, Issue 3, pp. 533-545, 2014-7.
Inazumi, S., Shang, H.M., Nakagishi, Y. and Kawabata, H.:
Characteristics of water-swelling friction reducing materials on the pulling-out removal of temporary works,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 6, No. 2, Issues 12, pp. 910-918, 2014-3.
2013
2012
Inazumi, S., Ohtsu, H. and Isoda, T.:
Environmental accounting on treatment and reutilization of construction sludges in geotechnical engineering fields,
International Journal of GEOMATE: Geotechnique, Construction Materials and Environment, IF2022 =0.7, The GEOMATE International Society, Vol. 3, No. 2, Issues 6, pp. 369-374, 2012-12.
Inazumi, S. and Ohtsu, H.:
Long-term environmental accounting on civil infrastructures in developing countries,
Journal of Environmental Science and Engineering B (formerly parts of Journal of Environmental Science and Engineering, ISSN1934-8932), ISSN2162-5263, David Publishing Company USA, Vol. 1 (Career Vol. 6), Issue 1, pp. 1-18, 2012-2.
